Servcorp Wireless
============================================================ ADE BRC BRI BSP DOC NWT OCT PER PWC RBA VER WES conf t default interface GigabitEthernet0/1.[[Client VLAN]] bridge irb bridge [[Client VLAN]] protocol ieee bridge [[Client VLAN]] route ip interface BVI [[Client VLAN]] description [[Client VLAN]] ip address 192.168.[[Client VLAN]].1 255.255.255.0 ip access-group C-[[Client VLAN]] in ip accounting output-packets ip nat inside ip virtual-reassembly no ip mroute-cache interface GigabitEthernet0/1.[[Client VLAN]] encapsulation dot1Q [[Client VLAN]] bridge-group [[Client VLAN]] bridge-group [[Client VLAN]] spanning-disabled ip flow ingress ip flow egress interface Integrated-Service-Engine1/0.[[Client VLAN]] encapsulation dot1Q [[Client VLAN]] bridge-group [[Client VLAN]] bridge-group [[Client VLAN]] spanning-disabled end ============================================================ OC: CHI, NSM, NR1, BRI conf t default interface GigabitEthernet0/1.[[Client VLAN]] bridge irb bridge [[Client VLAN]] protocol ieee bridge [[Client VLAN]] route ip interface BVI [[Client VLAN]] description [[Client VLAN]] ip address 192.168.[[Client VLAN]].1 255.255.255.0 ip access-group C-[[Client VLAN]] in ip accounting output-packets ip nat inside ip virtual-reassembly no ip mroute-cache interface GigabitEthernet0/1.[[Client VLAN]] encapsulation dot1Q [[Client VLAN]] bridge-group [[Client VLAN]] bridge-group [[Client VLAN]] spanning-disabled ip flow ingress ip flow egress interface Integrated-Service-Engine2/0.[[Client VLAN]] encapsulation dot1Q [[Client VLAN]] bridge-group [[Client VLAN]] bridge-group [[Client VLAN]] spanning-disabled end ===================================== BPP, EBP, CAN conf t default interface GigabitEthernet0/1.[[Client VLAN]] ! interface GigabitEthernet0/1.[[Client VLAN]] encapsulation dot1Q [[Client VLAN]] ip accounting output-packets ip flow ingress ip flow egress ip nat inside ip virtual-reassembly in bridge-group [[Client VLAN]] bridge-group [[Client VLAN]] spanning-disabled ! interface Vlan[[Client VLAN]] no ip address bridge-group [[Client VLAN]] ! interface BVI[[Client VLAN]] ip address 192.168.[[Client VLAN]].1 255.255.255.0 ip access-group C-[[Client VLAN]] in ip accounting output-packets ip nat inside ip virtual-reassembly in ! bridge [[Client VLAN]] protocol ieee bridge [[Client VLAN]] route ip ! vlan [[Client VLAN]] ! end



Client VLAN:


Use this code to post the full script to your own page:



Use this code to post only the variables to your own page: