Touro Standard Config
[[Location]] interface [[T1 Interface]] ip address [[T1 IP Address]] [[T1 Subnet Mask]] service-policy output Touro_ATC_MPLS router eigrp 50 network [[T1 Network IP & Wildcard Mask]] redistribute static route-map statictobgp no auto-summary crypto isakmp policy 10 encr 3des authentication pre-share crypto isakmp key T0uR0Scc address [[Tunnel Destination]] ! crypto ipsec transform-set TOURO_SCC_SET esp-3des esp-sha-hmac mode transport ! crypto ipsec profile TOURO_SCC set transform-set TOURO_SCC_SET ! interface Tunnel0 description ** Back-up to ATC MPLS** bandwidth [[Tunnel Bandwidth (kpbs)]] service-policy output GRE_Policy ip address [[Tunnel IP]] [[Tunnel Subnet Mask]] ip mtu 1400 ip tcp adjust-mss 1360 tunnel source [[Tunnel Source]] tunnel destination [[Tunnel Destination]] tunnel protection ipsec profile TOURO_SCC class-map match-any Queue1 match precedence 5 match ip precedence 5 match dscp ef match access-group name FacilityRadio class-map match-any Queue3 match precedence 2 3 match ip precedence 2 3 class-map match-any Queue2 match precedence 4 6 7 match ip precedence 4 6 7 class-map match-any Queue4 match precedence 0 1 match ip precedence 0 1 policy-map Touro_ATC_MPLS class Queue1 priority percent 40 class Queue2 bandwidth percent 20 random-detect class Queue3 bandwidth percent 20 random-detect class Queue4 bandwidth percent 20 random-detect policy-map GRE_Policy class class-default shape [[Tunnel Bandwidth (Bits)]] service-policy Touro_ATC_MPLS Router eigrp 100 distance eigrp 210 220 network [[Tunnel Network IP & Wildcard Mask]] redistribute static route-map statictobgp no auto-summary int loopback10 ip add [[Loopback IP]] [[Loopback Subnet Mask]]



Location:
T1 Interface:
T1 IP Address:
T1 Subnet Mask:
T1 Network IP & Wildcard Mask:
Tunnel Destination:
Tunnel Bandwidth (kpbs):
Tunnel IP:
Tunnel Subnet Mask:
Tunnel Source:
Tunnel Bandwidth (Bits):
Tunnel Network IP & Wildcard Mask:
Loopback IP:
Loopback Subnet Mask:


Use this code to post the full script to your own page:



Use this code to post only the variables to your own page: